The present contribution contains the 3D models of fossil humeri and ilia of anurans from various Eocene-Miocene deposits of Peruvian Amazonia. These fossils were described and figured in the following publication: Jansen et al. (2023), First Eocene–Miocene anuran fossils from Peruvian Amazonia: insights into Neotropical frog evolution and diversity. Papers in Palaeontology, The Palaeontological Association.
 
  

Indet. indet. MUSM 4746 View specimen

M3#1231 Humeral fragment (distal end) Type: "3D_surfaces" doi: 10.18563/m3.sf.1231   state:published

Download 3D surface file

Indet. indet. MUSM 4747 View specimen

M3#1232 Humeral fragment (distal end) Type: "3D_surfaces" doi: 10.18563/m3.sf.1232   state:published

Download 3D surface file

Indet. indet. MUSM 4748 View specimen

M3#1233 Humeral fragment (distal end) Type: "3D_surfaces" doi: 10.18563/m3.sf.1233   state:published

Download 3D surface file

Indet. indet. MUSM 4755 View specimen

M3#1234 Humeral fragment (distal end) Type: "3D_surfaces" doi: 10.18563/m3.sf.1234   state:published

Download 3D surface file

Indet. indet. MUSM 4756 View specimen

M3#1235 Humeral fragment (distal end) Type: "3D_surfaces" doi: 10.18563/m3.sf.1235   state:published

Download 3D surface file

Indet. indet. MUSM 4757 View specimen

M3#1236 Humeral fragment (distal end) Type: "3D_surfaces" doi: 10.18563/m3.sf.1236   state:published

Download 3D surface file

Indet. indet. MUSM 4761 View specimen

M3#1237 Humeral fragment (distal end) Type: "3D_surfaces" doi: 10.18563/m3.sf.1237   state:published

Download 3D surface file

Indet. indet. MUSM 4763 View specimen

M3#1238 Humeral fragment (distal end) Type: "3D_surfaces" doi: 10.18563/m3.sf.1238   state:published

Download 3D surface file

Indet. indet. MUSM 4765 View specimen

M3#1239 Humeral fragment (distal end) Type: "3D_surfaces" doi: 10.18563/m3.sf.1239   state:published

Download 3D surface file

Indet. indet. MUSM 4766 View specimen

M3#1240 Humeral fragment (distal end) Type: "3D_surfaces" doi: 10.18563/m3.sf.1240   state:published

Download 3D surface file

Indet. indet. MUSM 4775 View specimen

M3#1241 Humeral fragment (distal end) Type: "3D_surfaces" doi: 10.18563/m3.sf.1241   state:published

Download 3D surface file

cf. Pipa sp. MUSM 4776 View specimen

M3#1242 Humeral fragment (distal end) Type: "3D_surfaces" doi: 10.18563/m3.sf.1242   state:published

Download 3D surface file

Indet. indet. MUSM 4788 View specimen

M3#1243 Ilial fragment Type: "3D_surfaces" doi: 10.18563/m3.sf.1243   state:published

Download 3D surface file

Indet. indet. MUSM 4789 View specimen

M3#1244 Ilial fragment Type: "3D_surfaces" doi: 10.18563/m3.sf.1244   state:published

Download 3D surface file

Indet. indet. MUSM 4790 View specimen

M3#1245 Ilial fragment Type: "3D_surfaces" doi: 10.18563/m3.sf.1245   state:published

Download 3D surface file

Indet. indet. MUSM 4792 View specimen

M3#1246 Ilial fragment Type: "3D_surfaces" doi: 10.18563/m3.sf.1246   state:published

Download 3D surface file

Indet. indet. MUSM 4793 View specimen

M3#1247 Ilial fragment Type: "3D_surfaces" doi: 10.18563/m3.sf.1247   state:published

Download 3D surface file

Indet. indet. MUSM 4794 View specimen

M3#1249 Ilial fragment Type: "3D_surfaces" doi: 10.18563/m3.sf.1249   state:published

Download 3D surface file

Indet. indet. MUSM 4795 View specimen

M3#1250 Ilial fragment Type: "3D_surfaces" doi: 10.18563/m3.sf.1250   state:published

Download 3D surface file

cf. Pipa sp. MUSM 4796 View specimen

M3#1251 Ilial fragment Type: "3D_surfaces" doi: 10.18563/m3.sf.1251   state:published

Download 3D surface file

cf. Pipa sp. MUSM 4797 View specimen

M3#1252 Ilial fragment Type: "3D_surfaces" doi: 10.18563/m3.sf.1252   state:published

Download 3D surface file

This contribution contains the three-dimensional models of the inner ear of the hetaxodontid rodents Amblyrhiza, Clidomys and Elasmodontomys from the West Indies. These specimens were analyzed and discussed in : The inner ear of caviomorph rodents: phylogenetic implications and application to extinct West Indian taxa.

  

Amblyrhiza inundata 11842 View specimen

M3#1154 3D surface of the left-oriented inner ear of Amblyrhiza. Type: "3D_surfaces" doi: 10.18563/m3.sf.1154   state:published

Download 3D surface file

Clidomys sp NA View specimen

M3#1155 3D surface of the left-oriented inner ear of Clidomys sp. Type: "3D_surfaces" doi: 10.18563/m3.sf.1155   state:published

Download 3D surface file

Elasmodontomys obliquus 17127 View specimen

M3#1156 3D surface of the left-oriented inner ear of Elasmodontomys obliquus. Type: "3D_surfaces" doi: 10.18563/m3.sf.1156   state:published

Download 3D surface file

This contribution contains the three-dimensional digital models of a part of the dental fossil material (the large specimens) of caviomorph rodents, discovered in late middle Miocene detrital deposits of the TAR-31 locality in Peruvian Amazonia (San Martín, Peru). These fossils were described, figured and discussed in the following publication: Boivin, Marivaux et al. (2021), Late middle Miocene caviomorph rodents from Tarapoto, Peruvian Amazonia. PLoS ONE 16(11): e0258455. https://doi.org/10.1371/journal.pone.0258455
  

Microscleromys paradoxalis MUSM 4643 View specimen

M3#1115 Fragment of left mandibule preserving dp4, m1 and a portion of incisor Type: "3D_surfaces" doi: 10.18563/m3.sf.1115   state:published

Download 3D surface file

Ricardomys longidens MUSM 4375 View specimen

M3#1116 Fragment of left maxillary preserving DP4 and M1 (or M1 and M2) Type: "3D_surfaces" doi: 10.18563/m3.sf.1116   state:published

Download 3D surface file

"Scleromys" sp. MUSM 4272 View specimen

M3#1117 Isolated left upper molar Type: "3D_surfaces" doi: 10.18563/m3.sf.1117   state:published

Download 3D surface file

"Scleromys" sp. MUSM 4275 View specimen

M3#1118 Isolated right upper molar Type: "3D_surfaces" doi: 10.18563/m3.sf.1118   state:published

Download 3D surface file

"Scleromys" sp. MUSM 4273 View specimen

M3#1119 Isolated left upper molar Type: "3D_surfaces" doi: 10.18563/m3.sf.1119   state:published

Download 3D surface file

"Scleromys" sp. MUSM 4276 View specimen

M3#1120 Isolated right upper molar Type: "3D_surfaces" doi: 10.18563/m3.sf.1120   state:published

Download 3D surface file

"Scleromys" sp. MUSM 4282 View specimen

M3#1121 Isolated right lower molar Type: "3D_surfaces" doi: 10.18563/m3.sf.1121   state:published

Download 3D surface file

"Scleromys" sp. MUSM 4281 View specimen

M3#1122 Isolated right lower molar Type: "3D_surfaces" doi: 10.18563/m3.sf.1122   state:published

Download 3D surface file

"Scleromys" sp. MUSM 4280 View specimen

M3#1123 Isolated left p4 Type: "3D_surfaces" doi: 10.18563/m3.sf.1123   state:published

Download 3D surface file

"Scleromys" sp. MUSM 4277 View specimen

M3#1124 Isolated left lower dp4 Type: "3D_surfaces" doi: 10.18563/m3.sf.1124   state:published

Download 3D surface file

"Scleromys" sp. MUSM 4279 View specimen

M3#1125 Isolated right lower dp4 (mesial fragment) Type: "3D_surfaces" doi: 10.18563/m3.sf.1125   state:published

Download 3D surface file

gen.indet sp. indet MUSM 4283 View specimen

M3#1126 Isolated right lower p4 Type: "3D_surfaces" doi: 10.18563/m3.sf.1126   state:published

Download 3D surface file

Microscleromys sp. MUSM 4658 View specimen

M3#1127 Isolated left tarsal bone (astragalus) Type: "3D_surfaces" doi: 10.18563/m3.sf.1127   state:published

Download 3D surface file

This contribution provides the raw files for the μCT-scan data and renderings of the three-dimensional digital models of two fossil teeth of a geomyin geomorph rodent (Caribeomys merzeraudi), discovered from lower Oligocene deposits of Puerto Rico, San Sebastian Formation (locality LACM Loc. 8060). These fossils were described, figured and discussed in the following publication: Marivaux et al. (2021), An unpredicted ancient colonization of the West Indies by North American rodents: dental evidence of a geomorph from the early Oligocene of Puerto Rico. Papers in Palaeontology. https://doi.org/10.1002/spp2.1388 

Caribeomys merzeraudi LACM 162478 View specimen

	M3#712 Right lower dp4: isolated deciduous premolar. The specimen was scanned with a resolution of 5 µm using a μ-CT-scanning station EasyTom 150 / Rx Solutions (Montpellier RIO Imaging, ISE-M, Montpellier, France). AVIZO 7.1 (Visualization Sciences Group) software was used for visualization, segmentation, and 3D rendering. This isolated tooth was prepared within a “labelfield” module of AVIZO, using the segmentation threshold selection tool. Type: "3D_surfaces" doi: 10.18563/m3.sf.712   state:published	Download 3D surface file
	M3#714 5µm µCT data set . Right lower dp4: isolated deciduous premolar. The specimen was scanned with a resolution of 5 µm using a μ-CT-scanning station EasyTom 150 / Rx Solutions (Montpellier RIO Imaging, ISE-M, Montpellier, France). Type: "3D_CT" doi: 10.18563/m3.sf.714   state:published	Download CT data

Caribeomys merzeraudi LACM 162449 View specimen

	M3#713 Right lower molar (m1 or m2). The specimen was scanned with a resolution of 4.5 µm using a μ-CT-scanning station EasyTom 150 / Rx Solutions (Montpellier RIO Imaging, ISE-M, Montpellier, France). AVIZO 7.1 (Visualization Sciences Group) software was used for visualization, segmentation, and 3D rendering. This isolated tooth was prepared within a “labelfield” module of AVIZO, using the segmentation threshold selection tool. Type: "3D_surfaces" doi: 10.18563/m3.sf.713   state:published	Download 3D surface file
	M3#715 µCT data at 4.5µm Type: "3D_CT" doi: 10.18563/m3.sf.715   state:published	Download CT data

This contribution contains the 3D models of the fossil teeth of two chinchilloid caviomorph rodents (Borikenomys praecursor and Chinchilloidea gen. et sp. indet.) discovered from lower Oligocene deposits of Puerto Rico, San Sebastian Formation (locality LACM Loc. 8060). These fossils were described and figured in the following publication: Marivaux et al. (2020), Early Oligocene chinchilloid caviomorphs from Puerto Rico and the initial rodent colonization of the West Indies. Proceedings of the Royal Society B. http://dx.doi.org/10.1098/rspb.2019.2806 

Borikenomys praecursor LACM 162447 View specimen

M3#638 Right lower m3. This isolated tooth was scanned with a resolution of 6 µm using a μ-CT-scanning station EasyTom 150 / Rx Solutions (Montpellier RIO Imaging, ISE-M, Montpellier, France). AVIZO 7.1 (Visualization Sciences Group) software was used for visualization, segmentation, and 3D rendering. The specimen was prepared within a “labelfield” module of AVIZO, using the segmentation threshold selection tool. Type: "3D_surfaces" doi: 10.18563/m3.sf.638   state:published

Download 3D surface file

Borikenomys praecursor LACM 162446 View specimen

M3#639 Fragment of lower molar (most of the mesial part). This isolated broken tooth was scanned with a resolution of 6 µm using a μ-CT-scanning station EasyTom 150 / Rx Solutions (Montpellier RIO Imaging, ISE-M, Montpellier, France). AVIZO 7.1 (Visualization Sciences Group) software was used for visualization, segmentation, and 3D rendering. The specimen was prepared within a “labelfield” module of AVIZO, using the segmentation threshold selection tool. Type: "3D_surfaces" doi: 10.18563/m3.sf.639   state:published

Download 3D surface file

indet indet LACM 162448 View specimen

M3#640 Fragment of either an upper tooth (mesial laminae) or a lower tooth (distal laminae). The specimen was scanned with a resolution of 6 µm using a μ-CT-scanning station EasyTom 150 / Rx Solutions (Montpellier RIO Imaging, ISE-M, Montpellier, France). AVIZO 7.1 (Visualization Sciences Group) software was used for visualization, segmentation, and 3D rendering. This fragment of tooth was prepared within a “labelfield” module of AVIZO, using the segmentation threshold selection tool. Type: "3D_surfaces" doi: 10.18563/m3.sf.640   state:published

Download 3D surface file

The present 3D Dataset contains two 3D models described in Tissier et al. (https://doi.org/10.1098/rsos.200633): the only known complete mandible of the early-branching rhinocerotoid Epiaceratherium magnum Uhlig, 1999, and a hypothetical reconstruction of the complete archetypic skull of Epiaceratherium Heissig, 1969, created by merging three cranial parts from three distinct Epiaceratherium species. 

Epiaceratherium magnum NMB.O.B.928 View specimen

M3#534 3D surface model of the mandible NMB.O.B.928 of Epiaceratherium magnum, with texture file. Type: "3D_surfaces" doi: 10.18563/m3.sf.534   state:published

Download 3D surface file

Epiaceratherium magnum NMB.O.B.928 + MJSN POI007–245 + NMB.I.O.43 View specimen

M3#535 Archetypal reconstruction of the skull of Epiaceratherium, generated by 3D virtual association of the cranium of E. delemontense (MJSN POI007–245, in blue), mandible of E. magnum (NMB.O.B.928, green) and snout of E. bolcense (NMB.I.O.43, in orange). Type: "3D_surfaces" doi: 10.18563/m3.sf.535   state:published

Download 3D surface file

This contribution contains the 3D models of the fossil teeth of a small-bodied platyrrhine primate, Neosaimiri cf. fieldsi (Cebinae, Cebidae, Platyrrhini) discovered from Laventan deposits (late Middle Miocene) of Peruvian Amazonia, San Martín Department (TAR-31: Tarapoto/Juan Guerra vertebrate fossil-bearing locus n°31). These fossils were described and figured in the following publication: Marivaux et al. (2020), New record of Neosaimiri (Cebidae, Platyrrhini) from the late Middle Miocene of Peruvian Amazonia. Journal of Human Evolution. https://doi.org/10.1016/j.jhevol.2020.102835 

Neosaimiri cf. fieldsi MUSM-3888 View specimen

M3#538 MUSM-3888, right m3 of Neosaimiri cf. fieldsi. Type: "3D_surfaces" doi: 10.18563/m3.sf.538   state:published

Download 3D surface file

Neosaimiri cf. fieldsi MUSM-3890 View specimen

M3#540 MUSM-3890, left dp2 of Neosaimiri cf. fieldsi. Type: "3D_surfaces" doi: 10.18563/m3.sf.540   state:published

Download 3D surface file

Neosaimiri cf. fieldsi MUSM-3895 View specimen

M3#541 MUSM-3895, right DC1 of Neosaimiri cf. fieldsi. Type: "3D_surfaces" doi: 10.18563/m3.sf.541   state:published

Download 3D surface file

Neosaimiri cf. fieldsi MUSM-3891 View specimen

M3#542 MUSM-3891, lingual part of a fragmentary right M1 or M2 of Neosaimiri cf. fieldsi. Type: "3D_surfaces" doi: 10.18563/m3.sf.542   state:published

Download 3D surface file

Neosaimiri cf. fieldsi MUSM-3892 View specimen

M3#543 MUSM-3892, distobuccal part of a fragmentary right upper molar (metacone region) of Neosaimiri cf. fieldsi. Type: "3D_surfaces" doi: 10.18563/m3.sf.543   state:published

Download 3D surface file

Neosaimiri cf. fieldsi MUSM-3893 View specimen

M3#544 MUSM-3893, buccal part of a fragmentary right P3 or P4 of Neosaimiri cf. fieldsi. Type: "3D_surfaces" doi: 10.18563/m3.sf.544   state:published

Download 3D surface file

Neosaimiri cf. fieldsi MUSM-3894 View specimen

M3#545 MUSM-3894, lingual part of a fragmentary left P3 or P4 of Neosaimiri cf. fieldsi. Type: "3D_surfaces" doi: 10.18563/m3.sf.545   state:published

Download 3D surface file

This contribution contains the 3D model of the fossil talus of a small-bodied anthropoid primate (Platyrrhini, Cebidae, Cebinae) discovered from lower Miocene deposits of Peruvian Amazonia (MD-61 locality, Upper Madre de Dios Basin). This fossil was described and figured in the following publication: Marivaux et al. (2012), A platyrrhine talus from the early Miocene of Peru (Amazonian Madre de Dios Sub-Andean Zone). Journal of Human Evolution.  http://dx.doi.org/10.1016/j.jhevol.2012.07.005  

Cebinae indet. sp. MUSM-2024 View specimen

M3#380 Right talus 3D surface of a Miocene Cebinae indet. primate Type: "3D_surfaces" doi: 10.18563/m3.sf.380   state:published

Download 3D surface file

This contribution contains the 3D models of the isolated teeth attributed to stem representatives of the Cebuella and Cebus lineages (Cebuella sp. and Cebus sp.), described and figured in the following publication: Marivaux et al. (2016), Dental remains of cebid platyrrhines from the earliest late Miocene of Western Amazonia, Peru: macroevolutionary implications on the extant capuchin and marmoset lineages. American Journal of Physical Anthropology. http://dx.doi.org/10.1002/ajpa.23052 

Cebus sp. MUSM-3243 View specimen

M3#282 3D model of left lower m1 (lingual part) Type: "3D_surfaces" doi: 10.18563/m3.sf.282   state:published

Download 3D surface file

Cebuella sp. MUSM-3239 View specimen

M3#283 3D model of left lower p4 Type: "3D_surfaces" doi: 10.18563/m3.sf.283   state:published

Download 3D surface file

Cebuella sp. MUSM-3240 View specimen

M3#294 3D model of right upper P3 or P4 (buccal part) Type: "3D_surfaces" doi: 10.18563/m3.sf.294   state:published

Download 3D surface file

Cebuella sp. MUSM-3241 View specimen

M3#295 3D model of right upper P2 Type: "3D_surfaces" doi: 10.18563/m3.sf.295   state:published

Download 3D surface file

Cebuella sp. MUSM-3242 View specimen

M3#296 3D model of upper I2 Type: "3D_surfaces" doi: 10.18563/m3.sf.296   state:published

Download 3D surface file

This contribution contains the 3D models of the isolated teeth of Canaanimico amazonensis, a new stem platyrrhine primate, described and figured in the following publication: Marivaux et al. (2016), Neotropics provide insights into the emergence of New World monkeys: new dental evidence from the late Oligocene of Peruvian Amazonia. Journal of Human Evolution. http://dx.doi.org/10.1016/j.jhevol.2016.05.011
  

Canaanimico amazonensis MUSM-2499 View specimen

M3#289 3D model of left upper M2 Type: "3D_surfaces" doi: 10.18563/m3.sf.289   state:published

Download 3D surface file

Canaanimico amazonensis MUSM-2500 View specimen

M3#290 3D model of left upper M1 (lingual part) Type: "3D_surfaces" doi: 10.18563/m3.sf.290   state:published

Download 3D surface file

This contribution contains the 3D models described and figured in the following publication: Orliac M.J., Karadenizli L., Antoine P.-O., Sen S. 2015. Small suids (Mammalia, Artiodactyla) from the late Early Miocene of Turkey and a short overview of Early Miocene small suoids in the Old World. Paleontologia electronica 18(2): 18.2.30A: 1-48. https://doi.org/10.26879/547 

?Nguruwe galaticum SMT-1 View specimen

M3#16 fragment of palate with left broken M1-M3 Type: "3D_surfaces" doi: 10.18563/m3.sf16   state:published

Download 3D surface file